5 HVAC Trouble Prevention Points

Preventative Points for Your HVAC System to Use

When getting an HVAC system ready in your home, you have to think carefully about how it is going to be set up and maintained. There are many things that can be done with prevention in mind.

These solutions will keep your HVAC system from being at risk of serious damages. They also make your HVAC unit work better without wearing out any faster than it has to.

#1- Keep Your Filter Controlled

carrier hvacA proper air filter is needed to keep your HVAC system working. An air filter should take in foreign air particles and keep them from getting into your vents or other features inside your HVAC unit.

The filter should be replaced every few months. It should also be cleaned out every month in between each replacement just to keep it working clearly and quickly.

#2- Keep Space Open

You need at least two feet of space around your AC unit at all times. This is to let it get in enough outside air without being crowded in a spot where it might potentially overheat in.

#3- Protect the Outside

The outside has to be protected well enough so it will not take in grass clippings while mowing your lawn or dead leaves from a tree. You might have to create a small fence area near one side of the HVAC unit if it’s near a spot that you will trim with a mower. You must also trim off any branches of nearby trees so the risk of leaves or other items falling into or on top of the HVAC unit will be reduced.

#4- Clear the Condensate Drain

The condensate drain in your HVAC system should be reviewed carefully. It must be cleaned out every year so it will not develop bacteria or other kind of dirt. A good mixture of bleach and water can be added to your HVAC system to make it easier for this to be cleaned out right although you will need to be careful when getting it ready to work.

#5- Check All Refrigerant Lines

You need to look at the refrigerant lines every month to see that they are working. These should not have any clogs in them. They should also be carefully insulated. This is to keep them from wearing out or struggling to work as well as they should. You’ll have to see that these are run properly without being harder to follow than necessary.

Remember, working hard with your HVAC system will help you to keep it functional and ready to take on anything. Be sure you check on your HVAC system regularly to see that it’s working fine and that there will not be any problems coming out of it. This will make a real difference when done correctly and without problems.

Avoid Kitchen Drain Problems

Watch What You Put into Your Kitchen Drain

One of the biggest problems people come across in their plumbing involves clogs and backups in their drains. This is especially the case with kitchen drains.

While it might sound convenient for you to throw cleaner down your kitchen drain, you will only hurt your plumbing system when you put the wrong things down there.

avoid kitchen drain problems

What Problems Can Occur?

Buildups can start to develop when you put too much stuff into your kitchen drain. In particular, items might turn into pasty materials and stick onto the sides of your pipes. This in turn will make it harder for you to keep your kitchen drain under control.

Some items might also attract grease. This is a solid material that can harden and make it difficult for your pipes to be clear.

As these problems develop, your plumbing system will become backed up. It will be harder for items to go through the drain well. This can especially be problematic when you consider how many dishes your family goes through daily.

What Should You Avoid Putting Down There?

The list of things that you need to avoid adding into your kitchen drain includes many simple items that can actually do more harm to your drain than what you can afford to handle:

  • Coffee grounds can easily become backed up in your drain. They can stick together rather easily and cause some serious issues.
  • Any kind of grease will harden up and stick into your drain. This includes grease that comes from melted fats from various meats you prepare. You’ll have to drain your grease into something to let it harden so it can be disposed of in an alternate fashion.
  • Egg shells will create granular waste that will connect to other forms of waste. This makes it harder for the piping in the drain area to stay clear.
  • Anything that is absorbent should not be sent down your kitchen drain. These include cotton balls, small bits of napkins or anything else that can take in water and other items. These will add extra weight into your drain system.

All of these items can be disposed of with the rest of the trash in your home. Some items, particularly coffee grounds and egg shells, can be composted. These can be added to your garden or other space that needs nutrients for growing outside of your home so it will be easier for you to keep that space comfortable.

Conclusion

Be careful when taking care of your kitchen drain. Plumbing problems can easily develop if your kitchen drain is not treated the right way. By getting a better plan for maintaining your drain under control, it should be easier for you to keep your drain from bearing with annoying clogs.

Humidifiers and Heating Units

Using a Humidifier Works Well with Your Heating Device

While a great heater can warm up any spot in your home during the winter season, it can be rather difficult for you to get moisture in a home during the winter. The dry air of the winter can be bothersome to anyone. Fortunately, a humidifier can be used to help you get the most out of your heating device.

The air in your HVAC unit will be dry like the rest of the outdoor air during the winter season. Therefore, having a humidifier alongside your heater is always a good idea to consider. This can improve how your home gets enough heat while being rather efficient in the process.

What Makes a Humidifier Work Well?

using a humidifierA humidifier can be used with your heating unit to add extra moisture into the air. When the air is slightly moist, the heat will carry around well. It will move around the entire room.

Also, the heat will last for a longer period of time. It will not wear out quickly so you can always use your heater at a lower temperature if needed.

The heat will stick around for a while and you won’t have to compensate for losses by increasing the temperature. On a related note, you will not spend more money when you use a humidifier to keep the warm air under control.

How Will You Add the Humidifier?

A humidifier can always be added into a room that you plan on getting more warm air into. It helps to add it in a spot where you are more likely to use the heater in. This comes as you aren’t likely to find a humidifier that can be built directly into your heater unless you have an option that works with a water-based heating setup.

The humidifier should be prepared with a good water reservoir and should be in a spot not too far from your vents. This should help with getting the added moisture into the area without being harder to use than necessary. It will work wonders for your home when used right.

What About House Plants?

You can always use house plants alongside a heater to increase the humidity in a room. This works to allow a bit of added moisture as plants can generate a small amount of this in many cases. This should not be used as a total substitute for a humidifier but it can at least keep the load on that unit from having to be stronger than necessary.

Check carefully on how your heater is set up.. A great humidifier will do wonders for your heating needs when you consider how well it will preserve the air as it is heated.

Cleaning Your HVAC Keeps it Working

Learn about HVAC Cleaning

Getting your HVAC system cleaned regularly will keep it running smooth. There are plenty of great things that can be done to keep your system running right. While some you can do yourself, others are better left to the heating and air professionals.

Why Clean?

When your HVAC is clean our heater will be less likely to struggle with dust and other allergens. It will also take less time for it to heat up your home at a temperature that you might prefer.

Of course, the heater needs to be clean so foreign materials will not cause the parts in that heater to stop working. The problem with many outside materials is that they can be exceptionally dangerous. These include materials that might cause motors, coils and other features to suffer from more pressure than what they can afford to handle.

Filters Must Be Cleaned Out

The filters in your heating system have to be regularly. Filters should be cleaned out frequently to ensure the best functioning HVAC system. Keep an on yours to determine the frequency you will need to change your air filter.

All Radiators Must Be Cleared

Radiators inside a heater must also be cleaned out on occasion. This is to keep the radiators clear of debris or other outside items being a real problem. Considering how these help to carry out the heat that your home needs, it is a necessity to get these parts cleaned out properly and effectively.

How Is the Fan Working?

The fan in your heater is responsible for getting air moved through your ducts. Your fan must be cleaned out frequently too. This is especially important for outside units where snow and other things could get into your unit.

Ask About Removing Trapped Air

Trapped air may be found in any fluids found in your heater. This is especially important if you have a hot water radiator. Clearing out trapped air makes it easier for the warm air in your setup to be let out right. It also helps to ask a professional for tasks of this nature.

You must keep your HVAC system clean and ready for use at any time of the year. The process for cleaning your HVAC system should entail many parts that have to be taken care of the right way so it will be easier for your unit to be comfortable.

How Different Temperatures Save AC Issues

It is true that a great air conditioner will help you keep your home cooled off during the summer months. This is a great point for homes all around Houston, what with triple-digit temperatures not being uncommon.

Still, you should watch out for how much energy you use when getting your air conditioner working. You might want to use a different temperature from what you are regularly used to having.

What’s the Magic Number?

carrier hvacThe magic number for the ideal temperature that your home can handle is 78 degrees. That is, it is a point where it is cool and comfortable without being too chilly. It is also to cover the intense heat that you might experience outdoors.

While keeping the air conditioner on at 78 degrees sounds like a good idea, you have to be cautious. Making it cooler will end up being tougher on your air conditioner and your budget.

Why Keeping It Down Isn’t a Good Idea

You will use more energy if you keep the air conditioner down less than 78 degrees. You will increase your energy usage by about 8 percent for every degree that you go below 78. This can add up over time in the form of added expenses for using your air conditioner far too often.

This can especially be a real problem on the various parts of your air conditioner. The filter will work too hard and wear out quickly. The coil, fan and other parts will go through more pressure than necessary.

As these parts go through all that pressure, they will start to wear out and break apart. This could result in added maintenance expenses for you.

The risks that come with using the air conditioner at too low of a setting can be concerning. This is especially when you consider how expensive it can be to maintain or repair an overworked AC unit. Therefore, you should try and keep from putting your air conditioner down too low.

Increasing the Temperature Helps

When you increase the temperature on your air conditioner, you will save 8 percent on your AC cost for every temperature above 78 that you tune it to. This comes as the air conditioner will not be used too often and will not suffer from more fatigue than needed.

You can always tune the air condition to 80 or 82 degrees, for instance. This should be good enough for your home without making anything feel stuffy or uncomfortable.

You can also use a programmable thermostat that adjusts the unit at certain times. For instance, you can get the temperature to go up a few degrees at a point in the day when you expect to be out of the house. You should make sure this is controlled without being too warm to the point where items inside your home aren’t at risk of harm.

Remember that your air conditioner in Houston will use more power when it is at a cooler temperature. Try and keep it above 78 degrees if possible so it will be easier for you to keep from spending more than needed on your AC plans.

Why Replace Your Air Filters Regulary?

You will have to get all your air conditioning filters cleaned out and replaced regularly. This is an aspect of air conditioning that can make a real difference.

Why Check Your Filter?

Why change your air filtersYour filter must be checked properly to ensure that you get the most out of your air conditioner. A filter is used to keep harmful particles out of the air that moves into your home. This ensures that your air ducts will be clean and comfortable.

When everything is properly filtered, it will be easier for the air conditioner to keep working. This especially comes as harmful outside particles will not be at a risk of moving through ducts or other assorted parts of your HVAC unit. This should help you get the most out of your setup no matter what you are aiming to get out of it.

More importantly, your HVAC unit will work harder if the filters don’t work properly. When the filters aren’t functional or are clogged, the unit will have to use more power to get air through your home. The fact that this air may not necessarily be fully clean can especially be a concern. Additional parts may start to wear out if the filter isn’t keeping particles out of the way, thus making it easier for the air conditioner to stop working right.

When Should You Check Your Filters?

You should check your air conditioning filters every month. This should be enough time to give you a clear idea of what is going on within your HVAC unit. This is also to see how the filter has worked over an extended period of time.

You must especially check on your filters during the summer season. This is a time in the year where you are more likely to experience lots of allergens and other harmful particles getting in the way of your HVAC unit.

When To Replace

You should replace your air filter when it starts to become clogged up. If the filter appears to be collecting lots of materials that are falling off of it, you will have to get it replaced.

A good sign of when you need to replace is it when the filter appears to be dark in color. This is a sign that the filter has done its job and taken in large amounts of allergens and other compounds.

Don’t forget to see if there are any holes or other puncture spots in your filter. You will have to get a proper replacement in the event that there are such spots.

How Much Will It Cost?

The good news is that you will not have to spend far too much money replacing your air conditioning filters. A typical filter will cost about $50 to get in most cases although that cost may vary based on size and where you get it from. The savings that you will get from replacing your filter will certainly be worthwhile as you won’t use as much air or be at risk of allergic reactions all around.

Your air filter must be replaced carefully. You have to ensure that you take care of your air conditioner by keeping your energy usage from being a threat. This can especially ensure that your air conditioner will work right.

How is a Leaky Faucet Fixed?

Why is a Leaky Faucet a Problem?

A leaking faucet can be a very substantial problem in your plumbing. A leaking faucet occurs when there is a slight drip on a tap. This can be bothersome for many reasons:

how to fix a leaky faucet

  • It causes your home to use more water than necessary. The dripping will add up into extra water use over time.
  • The water that keeps dropping could hurt your sink from all the added pressure.
  • Your faucet’s parts may start to rust or bear with excess fatigue from the consistent amount of water moving through.
  • Depending on what it is like, the dripping sound that comes with a leaking faucet can become increasingly annoying.

Why the Faucet is Leaking

A leaking faucet can especially be problematic and hard to handle. However, it is a fact of life when you consider the causes of such an issue:

  • Your faucet will go through fatigue over time as its parts start to wear out. The O ring that keeps the faucet handle in place can wear out, thus causing the handle to keep from closing off the water all the way.
  • A washer that is constantly forced along the valve near your tap can wear out over time, thus allowing some water to move through.
  • Many parts around the faucet, including screws and adjusting rings, might become loose over time.
  • The seals used to keep the water in your faucet under control can also wear out. These seals may include ones that filter the water as it comes out. When seals wear out over time, it becomes easy for them to start leaking water.

It is clear that a leaking faucet can harm your property. This does not have to be a huge burden for long if you know what to do in order to fix the leak.

Process of Fixing a Faucet that is Leaking

The process used by a professional for fixing a leaking faucet is one of the most important services that you can utilize through the support of a plumber. The process works with a series of sensible steps:

  1. The faucet will have to be properly inspected. Individual parts must be checked to see what he issue might be. In some cases the entire faucet has to be taken apart.
  2. Replacement parts will be provided depending on what parts might need to be fixed. A plumber can determine what needs to be fixed by reviewing the parts based on how they are functioning.
  3. The faucet will have to be fully reassembled.

The extent of this process will vary based on how much repair has to be done. In most cases it should only entail one or two parts having to be replaced. It may also require more parts being cleared out depending on the intensity of the issue. The odds of the entire faucet having to be replaced are minimal as the issue should be easy to fix up over a period of time.

You will need to get any faucets that start leaking fixed up as soon as possible. This is to keep your property from struggling with any more of the effects of leaks than what you can handle.

Getting Clogged Drains Cleared Out Is a Necessity

Clogged drains can be very difficult for any property to bear with but they are issues that must be understood. Homes and businesses in Houston bear with clogged drains all the time. However, no two clogs are ever truly alike. You have to be careful when getting any kind of clog cleaned out the right way so you can keep the drains in your property from being more of a burden than they have to be.

What Types of Clogs Are There?

Clogs typically come in three forms:

  1. A main sewer line can be clogged. This often entails water and other items going directly into a sewer line in your area. When this is clogged up, much of the water in your home will be backed up.
  2. A washing machine clog can develop as bleach, detergent and various items cleaned out of your clothes build up over time. Sometimes lint or other items accidentally left in the clothes you are washing will make the situation worse.
  3. Your garbage disposal can also be a problem. The grease, oils and other items that keep going into your disposal can build up over time and cause clogs to develop.

Avoiding Chemical Cleaners Is Important

how to get rid of clogged drainsIt is true that many chemical cleaners may work well for your drain clearing needs. These products have chemicals that help to dissolve all sorts of clogs.

However, such chemicals might wear out the pipes in your plumbing system. They may also leave residues that can add up over time. This means that the clog will be cleared out but the flow in the system may still be restricted in some way.

A Plumber’s Snake Must Be Used Carefully

Sometimes a plumber’s snake may be applied into the area where the clog is. A plumber can use this device by identifying where the clog is in particular and using force to clear out that clog.

This can work quite well provided enough is done to make it easier for the clogged drain to be treated sensibly and carefully. The plumber’s snake tool must especially be used carefully so it does not scratch or impact your pipes in any way. This is why it’s so important for an expert to use such a tool and not to try it on your own.

PH Is Considered

The pH level of your clog could also be considered. Acids may be used as man clogs could be alkaline in nature. This comes as these compounds have settled into your drains and other spaces over time.

A clog could be treated with a mixture of various acids like borax, baking soda and even vinegar and lemon juice. A plumber can help you determine what items should be applied into your drain so you can get the proper treatment that you need for keeping your plumbing setup healthy.

The clogged drains that you have in your Houston-area property must be treated appropriately.  Drains come in many forms and should be reviewed so you’ll know what has to be treated. You should look carefully to see what can be done to ensure that a clogged drain is treated right as soon as possible.

Looking for a Reputable Plumber in Houston

Are you a residence of Houston, TX? sale-prelude.ru is the company of choice for your new plumbing installation. The Company boasts a massive 113 years of existence. It is a family-owned business which is under the management of 3rd and 4th generations. 

What Makes sale-prelude.ru Different

sale-prelude.ruWe are not in the business of taking your hard earned cash like some companies do. Our objective is to offer quality services to the residents of Houston. Once you call us, our staff receives your call and discuss with you on how to solve the problem.

We also give a free quote of the estimated cost before commencing. Our professionals attend your plumbing needs with high precision leaving you satisfied.

After signing a contract with us, we send our lead plumbers to the site. The team comes up with a unique plumbing model depending on the customer needs. If it is new buildings, the experts will remain on site right from the start of the project to the end since the installation process is continuous.

Why Choose Us?

Experienced and Reliable

Since 1903, we have handled over 100,000 commercial plumbing and air conditioning projects in Houston. For example, Highland Park Village in 1931 where we still repair and take care of other plumbing needs for the current home-owners. In 1934, we helped build Art Deco buildings which are today a National Historic Landmark. 

We’ve Got it Covered

With this experience, we have covered every aspect of new plumbing installation for your home or commercial buildings and if not we have a solution. Not just every other plumber will be able to build an excellent new plumbing installation.

Some might end up doing a shoddy job due to lack of experience and expertise. Just check the reviews from our customer and realize we lead the pack.

Well Trained Staff

We hire highly qualified staffs that have undergone proper training. The recruitment process is rigorous to ensure only candidates with required skills pass the test. Our plumbers are also licensed and insured as required by federal laws.

Modern Equipment

Lack of proper equipment can hamper the work resulting in a poor system. At sale-prelude.ru, there are all machines and chemicals required for new plumbing installation.

We purchase modern equipment from reputable manufacturers whose products are of high quality. Availability of requisite equipment enables the technicians to work with ease. 

Fast Response

Some Houston plumbers can keep you waiting for hours inconveniencing your plans. When you call us, we respond fast and give you a quote of the expected cost. If you require the services immediately, we dispatch our team to the site without delay.

Competitive Pricing

Our prices are competitive and in tandem with the market rates. Contact us for a free estimate of the cost of your new piping system. 

When Should You Contact Us for New Plumbing Installation?

When putting up a new building or home– New homes require a good design of the drainage and inlet system. At Houston, we have the manpower and equipment for installation of a proper structure.

When replacing an old or poorly planned piping system that block now and then. If we realize the drainage requires changing, we advise you accordingly. Frequent repairs can be expensive in the long run and waste a lot of your time. Some plumbing models are also inefficient and require replacement.

What to Look for When Hiring a Plumber

As a homeowner or even an apartment or condo owner, hiring is a plumber is not something to be taken lightly. If you don’t hire a plumber who delivers quality work then you are putting yourself at risk for high cost repairs that will be needed in the future and even potentially dangerous situations for yourself and your family. 

Quality is of the utmost importance as is experience. You don’t want somebody repairing some of the most important parts of your home like the toilet, and water heater if they don’t really know what they are doing! 

 Tips for Hiring A Plumber

1. Make Sure They Have Superb References!

Houston plumber

Hire the right sale-prelude.ru.

The number one thing I always recommend to anybody looking to hire a plumber is to make sure that they have wonderful references from previous clients who have hired them before and are more than satisfied with the job performed. 

 If a plumber has little to no references they aren’t likely to be very good or very experienced. A good plumber will go out of his or her way to ask satisfied customers to leave good reviews somewhere like Angie’s List or Yelp so future clients can see that they are hiring a well-known and liked plumber who knows their stuff!

 2. Bonded and Insured

 This is a big one and all plumbers should be insured and in most cases bonded as well. Making sure that somebody who will be working on your property is insured will protect both yourself and the plumber in the event of an accident or injury and no nasty lawsuits need to be filed. 

 3. Make Sure They Have a Warranty

 All good and reputable plumbers should guarantee their work including all of the parts they have used to do the job. Most warranties will hopefully cover any work the plumber has done for you up to a year after the job is finished.

If the plumber you are looking to hire refuses to guarantee their work, then definitely look for somebody else, because if something breaks and it is not covered under warranty than you will have to pay more to fix it, not worth it. 

Especially when there are plenty of plumbers out there willing to guarantee their work for a certain amount of time and help if anything goes wrong after the job is completed. 

4. Make Sure They Are Licensed to Practice in Your State

This should really go without saying but I’ll say it anyways, most states require that a plumber holds a license to practice in that state, although the outliers are New York and Kansas.

If your state does not require a plumber to be licensed before they can legally does a job then make sure that there have been no formal complaints filed against your plumber that you are considering to hire?

This can be a telltale sign to know if there will be trouble ahead if you choose to go with this particular plumber. 

 Final Thoughts on Hiring a Plumber

These are the most important things to look for when hiring a plumber and don’t skip any of these steps as they can cost you more money down the line then you need to spend!